The trailer frame serves as the base of the platform and is a welded structure made of I-beam spars, load-bearing crossbars and beams.

The frame of the rotary trolley is welded. Suspension brackets are attached to the frame spars. The drawbar brackets are attached to the front crossbar of the frame.

Suspension of a tubular axle with a 420x160 drum brake mechanism. Spring suspension "MAZ". The axles of the trailer wheels provide for the installation of gable disc wheels.

Pneumatic brakes The working brake system is pneumatic, two-wire equipped with ABS, consists of connecting heads, main filters, an air distributor, receivers with condensate drain valves, control outlet valves, brake force regulator, brake chambers and modulators. The pneumatic parking brake system acts through spring-loaded energy accumulators on the service brake pads of the second and third axles.

ABS ABS Electrical Equipment (4S/3M). The pneumatic coupling device is located in front of the frame on a bracket and is connected to the tractor's power supply system via a cable with an ISO7638 connector. ABS sensors are installed on the first and third axes. ABS manufactured by JSC Ekran, permissible installation of "Wabco".

Tires 315/80R22.5 universal tread pattern. Disc wheels, mounting with standard bolts and nuts, hole diameter 26 mm, wide-profile, tubeless, LPG tire.

Chassis Stopper installation. The locking device of a semi-automatic slewing trolley is designed to lock the trolley when the trailer is moving in reverse.Installing the turning circle.Installing the drawbar. The stepped drawbar is a rigid, triangular-shaped welded structure. The drawbar is pivotally connected to the frame of the slewing trolley by means of axles. Gas-free coupling Ø50 mm.Side protection according to UNECE Regulation No. 73.Steel rear entry protection (bumper) according to UNECE Regulation No. 58.Installation of rear mudguards with splash protection.Installation of front mudguards with splash protection (at the request of the consumer – without splash protection).

Installation of anti-rollback stops.Installation of hydraulic equipment.Installing the spare wheel.

A platform with a volume of 21.4 m3 with dump unloading to the rear.The body is lifted by a hydraulic cylinder at an angle of 45 degrees.

Metal sides. The side walls are equipped with a specialized ladder for climbing onto the platform. Tailgate with an upper attachment.

The awning is movable, it is wound in front of the platform onto the shaft. Made of imported fabric.

Electrical equipment

Electrical equipment with a rated voltage of 24 V is made according to a two-wire circuit.

The total weight of the trailer in running order is 10000 kg

The weight of the transported cargo is 20,000 kg

The technically permissible total weight is 30,000 kg

Structurally permissible total weight is 34,000 kg

The load on the first axle is 10000 kg

The load on the second axle is 10000 kg

The load on the third axle is 10000 kg

The axial distance of the 1st and 2nd axes is 3175 mm

The axial distance of the 2nd and 3rd axes is 1370 mm

The distance between the springs is 900 mm

The track of the inner wheels is 1440 mm

The track of the outer wheels is 2160 mm

Overall length 9085 mm

Overall width max 2550 mm

Overall height max 3270 mm

The inner length of the platform is 6300 mm

The inner width of the platform is 2300 mm

The internal height of the platform is 1450 mm

Platform volume 21.0 m3

The height of the platform in the center of the axis in the unloaded state is 1625 mm

The height of the platform in the center of the axis in the loaded state is 1580 mm

Height with maximum raised platform 6940 mm

The height of the horizontal drawbar

unloaded trailer 900 mm

Dump semi-trailers