Your city — Moscow?
Sale of special equipment in Vologda
Found 229 sales listings
EUROMIX ROLLTRUCK CMT 4000R concrete mixers
The EUROMIX ROLLTRUCK CMT 4000R self—propelled concrete mixer is a highly efficient solution for work on construction sites where autonomy and high productivity are required. Equipped with a 6.1 m3 double-cone mixing drum, this model is capable of producing up to 4 m3 of concrete in one cycle. The design of the drum with a double spiral screw and blades ensures uniform and high-quality mixing of the concrete mixture. The 116 hp YUNNEI turbocharged and water-cooled engine ensures reliable operation even in difficult conditions.
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
#30172
EUROMIX ROLLTRUCK CMT 1200 concrete mixers
Self—propelled concrete mixer with self-loading EUROMIX ROLLTRUCK CMT 1200 is a modern technology designed for autonomous preparation and transportation of concrete mixes directly on the construction site.
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
#30173
EUROMIX 400.4 mortar pumps
Screw (gerotor) mortar pumps of the EUROMIX 400.4 series manufactured by the EUROMIX PLANT are designed for transportation under pressure of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.4 series gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600 series mixers or with turbulent type mixers of the NAVIGATOR series. The EUROMIX 400.4 series pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30177
EUROMIX 400.1 MINI mortar pumps
EUROMIX 400.1 MINI screw (gerotor) mortar pumps manufactured by the EUROMIX PLANT are designed for pressure transportation of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.1 MINI gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600, EUROMIX SUPERMIX series mixers or EUROMIX NAVIGATOR series turbulent type mixers, EUROMIX 400.1 MINI pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30179
SKYER GTWY6-100 mast lifts
The single-masted telescopic lift SKYER GTWY6—100 is a reliable device for lifting people and goods to a height of up to 8 m for installation, repair and other work. It is equipped with a special bracket for hooking the safety rope. The load capacity of the model is 125 kg, which is enough to lift one worker and the necessary equipment. A retractable telescopic mast made of lightweight, durable aluminum alloy ensures smooth lifting of the work platform.
The alcohol level allows you to control the vertical position of the lift. Retractable outrigger supports provide stability to the model. If necessary, the SKYER GTWY6-100 can be stopped and lowered using the emergency stop buttons and the platform emergency release valve. The structure is mounted on a mobile base with a hydroelectric drive and a power supply unit. The small overall dimensions and weight allow the lift to be used in conditions of limited space. ...
The alcohol level allows you to control the vertical position of the lift. Retractable outrigger supports provide stability to the model. If necessary, the SKYER GTWY6-100 can be stopped and lowered using the emergency stop buttons and the platform emergency release valve. The structure is mounted on a mobile base with a hydroelectric drive and a power supply unit. The small overall dimensions and weight allow the lift to be used in conditions of limited space. ...
#30184
Scissor lift tables PROLIFT PF0805
The mobile electric scissor lift is an improved version of the SJY model and features high build quality. Reinforced metal is used to produce the main parts.
The electric switch is duplicated by a remote control for the possibility of control at height. Silent hydraulic system with explosion-proof valve. ...
The electric switch is duplicated by a remote control for the possibility of control at height. Silent hydraulic system with explosion-proof valve. ...
#30190
SKYER SKR6 Construction cradles
SKR 6 is a construction cradle of the SKYER brand with a lifting capacity of 630 kg. The improved three-section design of the facade platform with innovative control unit elements is designed for a long service life. The SKR 6 is designed to accommodate three people with the necessary tools and materials at the same time. It is used for facade and restoration work; for the repair of high-rise buildings, installation and maintenance of attachments.
Design and configuration features: ...
Design and configuration features: ...
#30201
NORSU RF-80TL Vibrating Plates
The RF-80TL straight-through vibrating plate of the NORSU brand is characterized by durability, reliability, ease of operation, and maneuverability. It is a smaller version of an asphalt paving roller, while it is more versatile - using the RF—80TL, you can tamp down the soil and level the laid paving stones. The model is in demand during road construction, installation of engineering communications, landscaping - wherever there is a need for layer—by-layer sealing, but there are no conditions for an approach for larger equipment.
The NORSU RF-80TL has proven itself well in working with sandy, gravel, and cohesive soils, and is suitable for working in corners and confined spaces. The built-in wheels allow you to quickly move it from one work site to another, minimizing work interruptions. The sealing depth is 300 mm, and the fuel tank capacity is 2.5 liters. ...
The NORSU RF-80TL has proven itself well in working with sandy, gravel, and cohesive soils, and is suitable for working in corners and confined spaces. The built-in wheels allow you to quickly move it from one work site to another, minimizing work interruptions. The sealing depth is 300 mm, and the fuel tank capacity is 2.5 liters. ...
#30205
NORSU RS-70H Vibrating plates
The NORSU RS-70H straight-through vibrating plate is versatile — due to the presence of a wetting system in the basic configuration, the model can be used not only for compacting sand, gravel or mixed soil, but also for laying asphalt. The cast base of the vibrating plate, which is resistant to deformation and abrasion, is made of a special wear-resistant alloy, characterized by durability and improved technical characteristics. Paving slabs using this model is possible in the presence of a special polyurethane mat (optional). The fuel tank capacity is 3.1 liters.
Main Features ...
Main Features ...
#30207
GEARSEN TL10227 mini cranes
The GEARSEN TL hydraulic crane is an autonomous folding (folding not only the upper part, but also the lower) mobile device designed for lifting, lowering and moving cargo over short distances. It is most often used in warehouses, workshops, car service stations and other places where it is difficult to place a stationary crane. The crane has a boom that easily allows you to transport a particular part or unit. The boom has several departure positions, which makes it possible to better adapt the crane to perform specific tasks. Despite its compactness and mobility, the model has an impressive load capacity of 1000 kg. The hydraulic system is operated manually.
Features and benefits: ...
Features and benefits: ...
#30216
GEARSEN SB2035 Gantry cranes
The GEARSEN SB gantry crane is a mobile lifting device with a monorail, which is used for various types of lifting operations. It can be used both in outdoor areas and inside industrial premises. The load capacity of the model is 2000 kg.
Features and benefits: ...
Features and benefits: ...
#30218
YETT CPCD25-XC5K2-M350-3W Forklift Trucks
The YETT CPCD25-XC5K2-M350-3W diesel loader has a load capacity of 2500 kg and a fork lift height of 3.5 m. The speed of movement (with or without cargo) is 18/18 km/h. Equipped with a powerful Chinese Xinchang 490 water-cooled engine; the engine is reliable and has a long service life.
The loader is equipped with a third line of hydraulics, which allows additional attachments to be connected if necessary. ...
The loader is equipped with a third line of hydraulics, which allows additional attachments to be connected if necessary. ...
#30220
YETT ERM15 mini M300 forklift trucks
The YETT ERM15 mini M300 electric mini loader is a modern, innovative model designed to carry out operations for moving and stacking goods on racks inside premises such as enclosed shopping malls, garden centers, repair depots, and retail businesses. Due to its small size, high maneuverability and small turning radius, it is the best solution for working in confined spaces, for example, in cold storage rooms, elevators.
The model has a lifting capacity of 1,500 kg, a fork lifting height of 3 m, and a travel speed of 7.2 km/h without cargo and 6.2 km/h with cargo. A 24-Volt lead-acid battery with a capacity of 400 Ah guarantees long-term autonomous operation, while energy-saving 4,500-watt (lifting) and 3,000-watt (moving) motors are designed for intensive operation. It can be equipped with a lithium-ion battery. ...
The model has a lifting capacity of 1,500 kg, a fork lifting height of 3 m, and a travel speed of 7.2 km/h without cargo and 6.2 km/h with cargo. A 24-Volt lead-acid battery with a capacity of 400 Ah guarantees long-term autonomous operation, while energy-saving 4,500-watt (lifting) and 3,000-watt (moving) motors are designed for intensive operation. It can be equipped with a lithium-ion battery. ...
#30223
FOXSTER TFD100 lifting tables and platforms
The TFD100 manual hydraulic table is a modern, reliable, mobile equipment that is used for lifting, transporting and holding loads. The load capacity of the device is 1000 kg. To lift, a special foot pedal is pressed, as a result of which a hydraulic drive and a double scissor mechanism are activated. Cargo tables are especially convenient for unloading vehicles in the absence of ramps and loading platforms. A solid surface without irregularities is required for comfortable use.
High-quality metal is used in the manufacturing process of the devices. The platform is coated with polymer powder coating with anticorrosive properties, its dimensions are 1200x610x60 mm. The maximum lifting height is 1700 mm. The control handle is ergonomically shaped, its height is 1030 mm. The tires of the wheels are made of polyurethane. The wheel diameter is 150 mm. The design has a foot parking brake. ...
High-quality metal is used in the manufacturing process of the devices. The platform is coated with polymer powder coating with anticorrosive properties, its dimensions are 1200x610x60 mm. The maximum lifting height is 1700 mm. The control handle is ergonomically shaped, its height is 1030 mm. The tires of the wheels are made of polyurethane. The wheel diameter is 150 mm. The design has a foot parking brake. ...
#30225
Lifting tables and platforms PROLIFT HIW3.0EU
The HIW 3.0EU table is used for lifting loads, has compact dimensions and relatively low weight. The table design is stationary. Main structural elements: support frame, scissor lifting mechanism, working platform. The scissor mechanism is operated by electrohydraulic drive. The hydraulic system includes a high-pressure cylinder with a double safety function, chrome-plated pistons. The power of the electric motor is 1500 watts. The control is carried out from a wired remote control, on which there are buttons for lifting, lowering and emergency shutdown. The length of the cable connected to the console is 3 m. The load capacity is 3000 kg. The lifting height of the platform is 1040 mm. Scope of application: car repair shops, service stations, transport terminals, warehouses, production facilities.
Basic parameters: ...
Basic parameters: ...
#30227
PROLIFT PRO MGRV3565 Reach trucks
The MGRV3565 li-ion is a high—performance multi-pass reach truck from the professional warehouse equipment PRO series of the PROLIFT brand. It is characterized by high efficiency and safety, which makes it possible to perform manipulations in various operating conditions. The fork positioning function helps when working with materials of various lengths, in particular long ones. Due to the ability of all wheels to rotate around their axis, the multi-way reach truck can move not only in a straight line, but also make turns on the spot, which makes it maneuverable in confined spaces. The lithium-ion battery with a capacity of 460 Ah provides long-term autonomous operation. Energy-saving motors are suitable for high-intensity operation. The permissible load capacity of the model is 3500 kg, the lifting height is 6.5 m.
Features: ...
Features: ...
#30239
PROLIFT M2 SPN 2016 Stackers
The PROLIFT M2 SPN2016 stacker is equipped with an electric fork lift function and is moved manually by the operator. Allows you to lift palletized loads up to 2 tons to a height of up to 1.6 m. Reliable hydraulic cylinders, wear-resistant polyurethane wheels, and a convenient foot brake are installed on this model. The double paint coating provides long-term protection against scratches and rust. An external charger is included.
- The mast made of a C-shaped profile with increased rigidity will ensure a long service life. ...
- The mast made of a C-shaped profile with increased rigidity will ensure a long service life. ...
#30244
PROLIFT SK20 Pallet Transporters
The PROLIFT SK20 self–propelled fork truck is a high-performance model with a lifting capacity of up to 2 tons, equipped with a folding platform for the operator and handrails. It is recommended for use in warehouses, sales halls, and industrial premises. Model Features:
- smooth control of the electric motor speed; ...
- smooth control of the electric motor speed; ...
#30249
XCMG XE690DK Crawler Excavators
The XCMG XE690DK hydraulic crawler excavator with a reverse shovel (weight 68-74 t) is designed for the development of soils and rock mass in difficult operating conditions in quarries and construction projects, in various climatic conditions (at ambient temperatures from –400C to +400C), at an altitude of up to 2000 m above sea level. The excavator is equipped with a Weichai WP17 Euro-3 diesel engine with a large power reserve (566 kW / 2100 rpm), high torque (3000 Nm) at low RPM (1200-1500 rpm) and good pick-up for heavy-duty applications, which ensures high productivity and efficiency in mining operations. fossils. This machine can be equipped with reinforced and rock buckets with a volume of 4,0 / 4,5 / 5,0 m3 based on the conditions of use and the type of material being developed, this ensures high operational efficiency and reduces energy consumption. The shape of the bucket, the radius and the depth of digging are selected in such a way as to reduce the resistance to excavation while ensuring the full productivity of the machine. The maintenance costs of the excavator are optimized.
Operating weight, kg 68 500 – 74 000 ...
Operating weight, kg 68 500 – 74 000 ...
#30254
Автокраны XCMG XCT20_S
Шоссейный автокран XCMG XCT20_S широко используется на крупных строительных объектах для подъемных работ, в общих инженерных проектах, таких как, строительная площадка, реконструкция городов, порты, мосты, нефтяные месторождения и шахты, а также сложные рабочие условия. Применяется в разных областях, благодаря своей мобильности и возможности использования на дорогах общего пользования, а также оперативности в готовности к работе при перемещении. Гидравлический автокран XCT20_S обладает отличными эксплуатационными и ходовыми характеристиками, надежной гидравлической системой. Мощный шестицилиндровый дизельный двигатель с турбонаддувом обеспечивает ему высокую производительность. Имеет высокую грузоподъемность 20 тонн и оснащен 5-секционной телескопической стрелой, выполненной из высокопрочной стали, которая может достигать вылета до 41,5 м. Автокран XCT20_S сконструирован с использованием новейших решений и разработок.
Макс. грузоподъемность, т 20 ...
Макс. грузоподъемность, т 20 ...
#30255
XCMG XGL140-8S Lifting Boom Tower Cranes
The XGL140-8S tower crane with a lifting (flywheel) boom is used for the construction of buildings with a height of more than 200 m, and is also used for construction in cramped conditions. The crane can be mounted inside the building with installation on floors or in an elevator shaft. It is convenient to mount and dismantle the entire tower crane. The lifting mechanism, traction mechanism and rotary mechanism are made using the latest solutions and developments, which ensures smoother running and operation. This model of tower crane is capable of rising to a considerable height of up to 450 m, which allows it to be used in the construction of tall buildings and structures. This crane model has a lifting capacity of 8 tons, is capable of lifting up to 1.8 tons at the end of its boom, and a maximum boom range of 50 m. The XGL140-8S tower crane is controlled from the operator's cabin on the boom. It is equipped with safety systems such as load monitoring systems, emergency braking and others to ensure safe operation on the construction site.
Load moment, tn 140 ...
Load moment, tn 140 ...
#30256
XCMG D5AT LGP Crawler Bulldozers
The D5AT LGP bulldozer is a hydro-mechanical transmission and electronically controlled machine developed by XCMG for overseas markets. This product has inherited the excellent quality of XCMG products, and its performance is stable and reliable. It is mainly suitable for excavation, backfilling, transportation of earth and stone and other operations on roads, railways, airports, etc. It is an indispensable construction machine for national defense projects, urban construction, water management and other structures. This equipment uses advanced technologies such as intelligent control, extreme load, hydraulic pilot blade control, electronic gearshift control, and construction data management. It is a construction equipment with advanced technology, high operational efficiency, convenient and flexible operation, and high reliability.
Working weight, 18.5 ...
Working weight, 18.5 ...
#30260
XCMG XGA12ACK Electric Crank Lifts
Max. working height, m 11.6
Max. load capacity, kg 230
Total weight, t 6.6 ...
Max. load capacity, kg 230
Total weight, t 6.6 ...
#30264
PROLIFT JF-1500 hydraulic trolleys
The JF-1500 scissor lift hydraulic trolley is capable of quickly and easily lifting loads weighing up to 1.5 tons.
The hydraulic trolley can be used as an auxiliary tool for production equipment. ...
The hydraulic trolley can be used as an auxiliary tool for production equipment. ...
#30270
Hydraulic trolleys (rolls) FOXSTER CW20
The CW20 hydraulic trolley is a storage equipment for moving palletized goods. The model is equipped with scales, which allows you to immediately sort the goods by weight. The weighing terminal with a screen is located on the trolley frame. Load cells are built into the fork structure. Load capacity 2000 kg.
Model Features: ...
Model Features: ...
#30272
Items per page:
Adding to favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access