Truck crane KS-55713-5B-1 series NEO chassis KAMAZ-43118

Parameter Value
Load capacity, t 25
Load moment, t.m 86
Boom length, m 9.5 - 28.2
Arrow profile OVOID
Reference contour, m
- maximum 5.1 x 6.1
- minimum 5.1 x 2.27
Crane operating area, degrees 260, 360
Track length, m (optional) 9.0+6.0
Angle of inclination of the jib, degree 0,20,40
The method of transportation of the goose separately
The maximum depth of lowering the hook, m 32
Maximum reach with main boom (single file/spacer), m 26 (34/24)
Maximum lifting height of the hook, m
- main boom 28.3
- main boom +jib 37.0
- main boom +jib extension (section)+gusek 42.7
The maximum load at which the boom can be telescoped is up to 6 tons
Lifting and lowering speed of the load, m/min
- nominal 8.1
- maximum 40.0
- planting 0.3
Rotation speed of the rotary part, rpm up to 1.7
Safety device OGM-240, Skylog
The maximum weight of the counterweight, t 5.5
Set of counterweights, t 0+1,0+1,5/4,5
Maximum equipment for movement, t 0+ without single track
Equipment for movement in standard loads, t 0+ without a single track
The chassis of the KAMAZ-43118 base vehicle
The wheel formula is 6 x 6
Chassis base, m 3.69 + 1.32
Chassis engine (EURO-5) Kamaz 740.705 - 300
- power, kW (hp) 221 (300)
Transport speed (single file), km/h 60 (60)
Crane dimensions in transport position, m (length x width x height) 12.00 x 2.55 x 3.915
Front overhang angle, degree 35
Rear overhang angle, degree 17
Minimum crane weight, t 21.5
Load on the first axle, t 6.5
Load on the rear trolley, t 15
Mass of towed trailer, t 12
Operating temperature, deg. From -40 to +40
The standard service life of the truck crane, 12 years
The warranty period of the crane is 18 months from the date of transfer of the crane to the consumer, but not more than 1000 operating hours