Your city — Москва?
Sale of gantry cranes in Moscow
Found 7 sales listings
RGC Gantry Cranes
Gantry cranes are used in warehouses, construction sites, hydraulic structures and hydroelectric power plants, slipways of shipbuilding enterprises Such cranes can perform a wide range of lifting and transport operations. They are divided into transshipment, construction and installation, as well as special ones, for example, for work on hydraulic structures. The lifting capacity of gantry cranes varies widely and can range from 1 to 1000 tons or more.
A gantry crane consists of one or two beams mounted on supports that move along rails located on the work site. One or two cargo trolleys mounted on the main beam are used for the transverse movement of the load. Lifting winches are located on the trolleys. The crane has an electric drive and is powered by an industrial network. The crane can be controlled using a remote radio control, a wired remote control or a stationary remote control. The stationary remote control is usually located in the cabin, which protects the operator from adverse weather conditions.
Gantry cranes are designed and manufactured based on customer requirements and meet the set tasks as much as possible, including non-standard ones that require an original solution....
A gantry crane consists of one or two beams mounted on supports that move along rails located on the work site. One or two cargo trolleys mounted on the main beam are used for the transverse movement of the load. Lifting winches are located on the trolleys. The crane has an electric drive and is powered by an industrial network. The crane can be controlled using a remote radio control, a wired remote control or a stationary remote control. The stationary remote control is usually located in the cabin, which protects the operator from adverse weather conditions.
Gantry cranes are designed and manufactured based on customer requirements and meet the set tasks as much as possible, including non-standard ones that require an original solution....
#30741
#17397
Gantry cranes CRANSTROYMONTAZH KKD magnetic, Moscow
The crane is recommended for servicing warehouses of piece, long and other cargoes, landfills for the production of reinforced concrete products, open areas of industrial enterprises and freight yards. The electrical equipment is located in a cabinet protected from climatic conditions. The operating temperature range is -40° to +40°C. Permissible wind speed, m/sec. working condition - 14 non-working condition - 27. The seismicity of the installation area is up to 6 points according to SniP 11-7-81. The crane is equipped with manual anti-theft grips and a wind detector....
#2226
Gantry cranes KRANSTROYMONTAZH KKD graferny, Moscow
The crane is recommended for servicing open warehouses of bulk cargoes (coke, bauxite, limestone, shavings, scrap, crushed stone, ore, etc.) and transshipment sites of enterprises. The electrical equipment is located in a cabinet protected from climatic conditions. The operating temperature range is -40° to +40°C. Permissible wind speed, m/sec. working condition - 14 non-working condition - 27. The seismicity of the installation area is up to 6 points according to SniP 11-7-81. The crane is equipped with manual anti-theft grips and a wind detector....
#2225
Gantry cranes KRANSTROYMONTAZH KKD magnetically-grappler, Moscow
The crane is recommended for carrying out loading and unloading and storage operations at enterprises, open landfills for the production of precast concrete and warehouses of finished products. The electrical equipment is located in a cabinet protected from climatic conditions. The operating temperature range is -40° to +40°C. Permissible wind speed, m/sec. working condition - 14 non-working condition - 27. The seismicity of the installation area is up to 6 points according to SniP 11-7-81. The crane is equipped with manual anti-theft grips and a wind detector....
#2223
Gantry cranes KRANSTROYMONTAZH KKD , Moscow
The crane is recommended for carrying out loading and unloading operations with timber in lower timber warehouses, timber processing, woodworking and pulp and paper enterprises. The crane can be equipped with a grapple or a traverse. The electrical equipment is located in a cabinet protected from climatic conditions. The operating temperature range is -40° to +40°C. Permissible wind speed, m/sec. working condition - 14 non-working condition - 27. The seismicity of the installation area is up to 6 points according to SniP 11-7-81. The crane is equipped with manual anti-theft grips and a wind alarm...
#2204
You might also be interested in other listings:
TENEL Group pipe laying machines based on BT10M bulldozer, 12t, Moscow
Basic tractor BT-10M
Track width, mm 500
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
Track width, mm 500
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
#14955
Короткобазные автокраны XCMG XCR30_S
Короткобазный автокран XCMG XCR30_S – самый маленький кран в линейке самоходных. Обладает грузоподъемностью 30 т и максимальной длиной стрелы с гуськом до 42 м. Может использоваться как при погрузочно-разгрузочных, так и при строительно-монтажных работах.
Макс. грузоподъемность, т 30 ...
Макс. грузоподъемность, т 30 ...
#30257
GEARSEN SB2035 Gantry cranes
The GEARSEN SB gantry crane is a mobile lifting device with a monorail, which is used for various types of lifting operations. It can be used both in outdoor areas and inside industrial premises. The load capacity of the model is 2000 kg.
Features and benefits: ...
Features and benefits: ...
#30218
GEARSEN SB1035 Gantry cranes
The GEARSEN SB gantry crane is a mobile lifting device with a monorail, which is used for various types of lifting operations. It can be used both in outdoor areas and inside industrial premises. The load capacity of the model is 1000 kg.
Features and benefits: ...
Features and benefits: ...
#30217
GEARSEN TL20238 mini cranes
The GEARSEN TL hydraulic crane is an autonomous folding (folding not only the upper part, but also the lower) mobile device designed for lifting, lowering and moving cargo over short distances. It is most often used in warehouses, workshops, car service stations and other places where it is difficult to place a stationary crane. The crane has a boom that easily allows you to transport a particular part or unit. The boom has several departure positions, which makes it possible to better adapt the crane to perform specific tasks. Despite its compactness and mobility, the model has an impressive load capacity of 2000 kg. The hydraulic system is operated manually.
Features and benefits: ...
Features and benefits: ...
#30215
Huba Tm6016-8 QTZp125 Tower Cranes
Huba Tm6016-8 QTZp125 Tower Crane
Specifications: ...
Specifications: ...
#30144
SDMO HX3000c generators,顿河畔罗斯托夫
The lifting capacity of these cranes is 300 ... 400 t, the spans are 60 ... 80 m and the lifting height is 20 ... 30 m.
#17553
基于BT10M20t推土机的TENEL集团铺管机，莫斯科
Basic tractor BT10MB
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
#14960
TENEL Group pipe laying machines based on the BT10M 20t bulldozer, Moscow
Basic tractor BT10MB
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
Track width, mm 700
Engine operating power, kW (hp) at 1400 rpm 132 (180) ...
#14958
Potain tower cranes, Moscow
Method of movement: stationary
Construction: headless
A FRESH POTAIN MCT 188 J8 ON THE L68B3 TOWER ...
Construction: headless
A FRESH POTAIN MCT 188 J8 ON THE L68B3 TOWER ...
#1992
莫斯科XCMGXCT30S汽车起重机
Power: 340 hp (250 kW)
Boom length: 43.6 m
Lifting capacity: 55 t
Boom length: 43.6 m
Lifting capacity: 55 t
#13775
XCMG XCT30S Truck cranes, Moscow
Power: 341 hp (251 kW)
Boom length: 42 m
Lifting capacity: 30 t
Boom length: 42 m
Lifting capacity: 30 t
#13774
莫斯科XCMGRP705沥青摊铺机
Power: 341 hp (251 kW)
Boom length: 42 m
Load capacity: 25 t
Boom length: 42 m
Load capacity: 25 t
#13772
KLINTSY cranes KS-55713-5K-4V, Moscow
Truck crane 25t 33-meter Klintsy KS-55713-5K-4V on Kamaz 43118. 6x6 chassis with a lifting capacity of 7 tons, boom reach of 33.6 meters, Euro 5,300 hp Bosch fuel system.
#4392
KLINTSY cranes KS-55713-5K-4V, Moscow
Truck crane 25t 33-meter Klintsy KS-55713-5K-4V on Kamaz 43118. 6x6 chassis with a lifting capacity of 7 tons, boom reach of 33.6 meters, Euro 5,300 hp fuel system Bosch.
#4391
TEREX COMEDIL CTT 141 A-6 TS tower cranes, Moscow
Method of movement: stationary
Terex Comedil CTT 141/A-6 TS16 Tower Crane
Excellent technical condition ...
Terex Comedil CTT 141/A-6 TS16 Tower Crane
Excellent technical condition ...
#1995
Potain tower cranes, Moscow
Method of movement: stationary
Construction: quick-to-assemble
For sale is a Potain IGO T70A 2013 quick-mount tower crane with operating time. Main technical specifications: ...
Construction: quick-to-assemble
For sale is a Potain IGO T70A 2013 quick-mount tower crane with operating time. Main technical specifications: ...
#1994
GIRAFFE tower cranes, Moscow
Method of movement: mobile
Undercarriage: rail
Construction: bottom-turning ...
Undercarriage: rail
Construction: bottom-turning ...
#1993
Items per page:
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access