Your city — Moscow?
Sale of special equipment in Moscow
Found 3258 sales listings
Poultry semi-trailer with lifting roof Tonar-98882
The semi-trailer is designed to transport poultry for slaughter in metal containers from various manufacturers.
Advantages: ...
Advantages: ...
#30685
Semi-trailer with sliding floors Tonar SPD4-55
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
No risk of overturning of the semi-trailer during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
No risk of overturning of the semi-trailer during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30686
Tonar-9599 grain semi-trailer with rear and side unloading
The Tonar-9599 grain semi-trailer with an aluminum body is suitable for transporting goods with a total weight of up to 35 tons. The technique can be used for various purposes. Its direct purpose is bulk transportation of grain crops and mixed feed. But the rest of the time, palletized cargo can be delivered on a semi-trailer.
Features ...
Features ...
#30688
Tonar-9598 grain semi-trailer with side unloading
The Tonar-9598 grain semi-trailer is suitable for transporting goods with a total weight of up to 30 tons. The technique can be used for various purposes. Its direct purpose is bulk transportation of grain crops and mixed feed.
Features ...
Features ...
#30689
Semi-trailer with sliding floors Tonar SDP3-89
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30698
Semi-trailer with sliding floors Tonar SDP4-89
The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....
#30699
Dump semi-trailer with rear unloading Tonar SH4-34
The lightweight dump truck semi-trailer is suitable for transporting various bulk building materials. For effective operation of the coupling, a tractor with a 4x2 wheel formula is required.
Dimensions: ...
Dimensions: ...
#30704
#30713
TZCO TZ1000EXD Crawler Excavator
The TZ1000EXD model
Operating weight
97,000 kg ...
Operating weight
97,000 kg ...
#30714
#30715
#30716
#30717
#30718
Crawler Excavator TZCO TZ260EXD
The TZ260EXD model
Operating weight
26705 kg ...
Operating weight
26705 kg ...
#30719
#30720
Crawler Excavator TZCO TZ210EXD
The TZ210EXD model
Operating weight
22,030 kg ...
Operating weight
22,030 kg ...
#30721
Crawler Excavator TZCO TZ135EXD
The TZ135EXD model
Operating weight
13,500 kg ...
Operating weight
13,500 kg ...
#30722
Crawler Excavator TZCO TZ36EXD
Classification
TZ36EXD
Operating weight ...
TZ36EXD
Operating weight ...
#30723
DX400LC-7B Crawler Excavator
The Developon (Doosan) DX400LC-7B crawler excavator is a high–performance machine for heavy construction and mining operations. With a powerful 290 hp engine and advanced hydraulics, it provides maximum performance with low fuel consumption. The robust and reliable design is designed for use in the most difficult conditions, ensuring durability and stability. The cabin with improved noise insulation, wide visibility and ergonomic controls ensures operator comfort even during long shifts. The DX400LC-7B is your reliable partner for large and complex projects....
#30724
#30725
DX220LC-7M Crawler Excavator
The Developon (Doosan) DX220LC-7M Tier 3 crawler excavator is a powerful and cost–effective solution for construction, earthmoving and infrastructure work. The 167 hp engine provides high performance with minimal fuel consumption. The intelligent hydraulic system and optimized operating modes increase the accuracy and efficiency of operations. The robust undercarriage and robust construction are designed to work in harsh conditions. The cabin with improved noise insulation, ergonomic controls and climate control ensures comfort even during long shifts. The DX220LC-7M is a combination of reliability, power and comfort for any professional task....
#30726
#30727
DX150W-7B Wheeled Excavator
Classification
DX150W-7B
Operating weight ...
DX150W-7B
Operating weight ...
#30728
Backhoe loader Elabon (Doosan) TMS BL-3X
Bucket capacity:
1.0 m3
Load capacity: ...
1.0 m3
Load capacity: ...
#30729
Items per page:
Adding to favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access