Sale of log trucks (timber trucks) in Veliky Novgorod

Non–mileage logging truck based on FAW J6 CA3250 truck with CA6DL2-37E5 engine, EURO 5 Transmission: manual, 12-speed, synchronized, with demultiplier.

Description of the model ...

Three-axle sorting trailer with swivel drawbar, model AH-342
A popular model of a sorting truck designed for the harsh conditions of Siberia.The AH-342 model features a specially designed design for use in the Siberian region. The trailer on a spring suspension is designed for harsh conditions. Reinforced suspension, special wing design, protection of electrical and pneumatic wiring from mechanical damage - all this in order to maximize the service life of the equipment. The reinforced drawbar ensures the reliability of the trailer and distinguishes the model from competitors.
...

The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.

There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....

The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.

There is no risk of the semi-trailer tipping over during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....

The sliding floor consists of a series of longitudinal aluminum beams that are hydraulically driven. The drive is three-section. Each section of the beams is powered by its own hydraulic cylinder. The beams perform reciprocating movements in the longitudinal direction. During unloading and loading, all sections of the beams move simultaneously (the beam stroke is 200 mm.). When the beams are reversed, the sections move alternately. Then the cycles repeat and the load moves. The time of full unloading is 15 minutes.

No risk of overturning of the semi-trailer during unloading, in comparison with semi-trailers with dump truck lifting. Loading and unloading takes place horizontally, relative irregularities are not dangerous, as well as unstable soils of unloading sites. Unloading can be carried out in rooms with a ceiling height not much higher than the actual semi-trailer (low warehouses, factory workshops, docks). Full control of the hydraulic structure from a manual remote control panel. The design of the sliding floor does not require any routine technical support during operation. The ability to load and unload without using a loader inside the body....

Albatross D1 is an industrial quadcopter with a flight time of up to 60 minutes
The body is made of composite materials and carbon fiber power elements. The device has small dimensions and high performance. It is universal for performing a variety of tasks. It is ideal for video monitoring of the area and for cargo delivery. 1 year warranty or 100 take-off/landing cycles
...

The M5 AGRO unmanned complex is designed for
agricultural enterprises. The M5 AGRO unmanned complex is a ready-made solution for agriculture. It allows you to receive and independently process information about your fields and the operations taking place on them. The kit includes: an Albatross M5 UAV, a camera, a ground control station, and additionally a multispectral camera can be included in the complex. The warranty is 1 year or 100 take-off/landing cycles.
...

Albatross M5
Productive and easy to operate
...

Geoscan 201 Geodesy

A complex for aerial photography and modeling of vast territories and extended objects with a photogrammetric camera and a GNSS receiver. A complex for aerial photography with a flight time of up to 3 hours. Geoscan 201 Geodesy allows you to shoot up to 80 square kilometers per day and obtain orthophotographs with geo-reference accuracy that meets the requirements of the 1:500 scale. And thanks to the geodetic GNSS receiver on board, it is possible to obtain the exact coordinates of the snap images and improve the quality of data processing. ...

The BONUM Machine-building Plant is a popular manufacturer of specialized trailers and semi-trailers, which offers to buy a curtain-side semi-trailer for rolling goods or transporting cable coils, etc. Semi-trailers for transporting steel coils or coils are supplied at a bargain price in Moscow directly from the manufacturer.

A special feature of semi-trailers with a coil–tub (from coil - coil) is the presence of special recesses (baths) in the floor, into which the rolled load is placed and fixed. If necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer. ...

BONUM Machine-building Plant, a popular manufacturer of specialized trailers and semi-trailers, as well as special cargo and agricultural machinery in Russia, offers to buy a roll truck: a curtain three-axle semi-trailer for transporting steel coils at a bargain price in Moscow.

A special feature of semi-trailers is the presence of special recesses in the floor, into which the rolled cargo is placed and fixed. If not necessary, the recess is closed with specialized caps (blocks). As a result, a standard (without recesses) floor is created in the semi-trailer. ...

Five-axle container semi-trailer, model SW-570
The SW-570 model consists of two container semi-trailers at once: a three-axle and a two-axle, which are interconnected using a saddle-bearing device. In fact, two semi-trailers can be operated either separately or together. The semi-trailer container ship model SW-570 is designed for transportation of the following types of containers:
...

Three-axle woodchip semi-trailer, SP-345 with a body volume of 120 m3
Updated SP-345 three-axle woodchip semi-trailer with a record body volume of 120 m3! The trailer's load capacity is 29 tons. Like all products from Meusburger Novtrak, the semi-trailer is equipped with modern systems!
...

Undercarriage: wheeled
In good condition. The engine is uncomplicated. The price includes VAT. It does not require investments. Serviced by an official dealer. Under the order. Possible sale on lease. Ready for operation. I'll help with the delivery.

Weight of the transported cargo, kg - 50,000
Curb weight of the semi-trailer, kg - 12,300
The total weight of the semi-trailer, kg is 62,300 ...

Weight of the transported cargo, kg - 50,000
Weight of the loaded semi-trailer, kg - 12000
The total weight of the semi-trailer, kg is 62,000 ...

Loading range (cross-section) 1.5 m2
Overall width 2.33 m
Total length 4.87 m ...

Loading range (cross-section) 2.5 m2
Overall width 2.56 m
Total length 5.6 - 6.6 m ...

Loading range (cross-section) 2.5 m2
Overall width 2.47 m
Total length ...

Loading range (cross-section) 2.5 m2
Overall width 2.4 m
Total length 6.2 m - 7.6 m ...

The machine is designed for collecting, loading, transporting through logging areas and portages of sorts, as well as unloading, sorting and storing them. The use of the machine is effective on soils with medium and high bearing capacity.
Manufacturer: JSC "Minsk Tractor Plant"
...

Volume

63 m3 ...

The load capacity is 10 tons.YAMZ-6565 Euro-4 engine, Ural 55571 chassis, tires:ID-P284 Analog 596009

The price includes VAT. Under the order. Free shipping. It does not require investments. Serviced by an official dealer. Possible sale on lease. Ready for operation.

Undercarriage: wheeled
In good condition. Under the order. The price includes VAT. Free shipping. It does not require investments. Possible sale on lease.