Your city — Москва?
Sale concrete mixing equipment in Владимире
Found 13 sales listings
遮阳篷或窗帘五十铃前进，莫斯科
The JAC N350 concrete mixer truck with a 6x4 wheel formula and an allowable gross weight of 35 tons is designed to deliver concrete mix and/or prepare it en route or upon arrival at the concreting site. The dimensions of the car are 9720x2550x3960 mm, the wheelbase is 4100 +1350 mm. The weight of the vehicle in running order is 15030 kg.
A Chinese-made mixing drum with a capacity of 10 cubic meters is installed on the JAC N350 chassis. The drum is installed at an angle of 12 degrees and is equipped with a 400 liter water tank. The loading/unloading speed is 2.7/0.65 cubic meters/min. ...
A Chinese-made mixing drum with a capacity of 10 cubic meters is installed on the JAC N350 chassis. The drum is installed at an angle of 12 degrees and is equipped with a 400 liter water tank. The loading/unloading speed is 2.7/0.65 cubic meters/min. ...
#18160
Concrete mixers FAW J6P CA5250 6x4
FAW AMKAR Mixer-704783-30 - a truck with a rotating capacity of 10 cubic meters mounted on the chassis. to deliver the finished concrete mix to the construction site.
Description of the model ...
Description of the model ...
#30033
Concrete mixers FAW J6P CA5250 8x4
The AMKAR 704783-31 mixer is a construction machine with a mixing drum with a volume of 12 cubic meters on the FAW 3310 chassis with an 8x4 wheel formula.
Description of the model ...
Description of the model ...
#30034
Sany HBT6013C-5D Stationary Concrete pumps
Diesel concrete pump SANY HBT6013C-5D, 2022
Specifications: ...
Specifications: ...
#30142
Silos for cement and dry mixes EUROSILO MOBILE 25
The EUROSILO MOBILE horizontal cement silo is designed to receive cement from a cement truck, store and deliver it via a screw conveyor.
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOJET series filters with a pulse purge system of filter elements with compressed air, which has both remote and local control. The bag filter is attached to the silo tank and is used to clean the dusty air coming out of the silo when loading cement. ...
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOJET series filters with a pulse purge system of filter elements with compressed air, which has both remote and local control. The bag filter is attached to the silo tank and is used to clean the dusty air coming out of the silo when loading cement. ...
#30167
Silos for cement and dry mixes EUROSILO collapsible structure D 9.2 m
EUROSILO collapsible cement silos are designed for receiving cement from a cement truck, storing and delivering it via a screw conveyor to a concrete mix preparation site. Cement is loaded into the silo via a pneumatic cement pipeline, and an aeration system is installed in the lower (conical) part of the silo to ensure non-stop material supply.
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOTOP air filters with a pulse purge system for filter elements, which has both remote and local control. The air filter is installed on the upper platform of the silo and is used to clean the dusty air coming out of the silo when loading cement. ...
To monitor the cement level in silos, lower and upper level sensors are installed, and silos are equipped with SILOTOP air filters with a pulse purge system for filter elements, which has both remote and local control. The air filter is installed on the upper platform of the silo and is used to clean the dusty air coming out of the silo when loading cement. ...
#30168
EUROMIX ROLLTRUCK CMT 4000R concrete mixers
The EUROMIX ROLLTRUCK CMT 4000R self—propelled concrete mixer is a highly efficient solution for work on construction sites where autonomy and high productivity are required. Equipped with a 6.1 m3 double-cone mixing drum, this model is capable of producing up to 4 m3 of concrete in one cycle. The design of the drum with a double spiral screw and blades ensures uniform and high-quality mixing of the concrete mixture. The 116 hp YUNNEI turbocharged and water-cooled engine ensures reliable operation even in difficult conditions.
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
An enclosed ROPS & FOPS cab, located to the side of the bucket, ensures maximum operator comfort and safety. A 170-liter hydraulic system and a 600-liter bucket with a serrated blade make component loading fast and efficient. The turning radius of the machine is 4000 mm, which allows it to be maneuverable even in limited areas. ...
#30172
EUROMIX ROLLTRUCK CMT 1200 concrete mixers
Self—propelled concrete mixer with self-loading EUROMIX ROLLTRUCK CMT 1200 is a modern technology designed for autonomous preparation and transportation of concrete mixes directly on the construction site.
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
The machine is equipped with a double-cone drum with a double spiral screw, which ensures uniform mixing of the components.The EUROMIX ROLLTRUCK CMT 1200 is capable of producing up to 1.2 m3 of concrete per cycle at a drum rotation speed of 13 rpm. This model is characterized by a high level of maneuverability and maneuverability thanks to an automatic transmission and a powerful 75 hp engine. The turbocharged four-cylinder engine meets Euro-2 environmental standards, which makes it economical and environmentally friendly. The operator's cabin is protected from external influences and provides maximum driving comfort. ...
#30173
EUROMIX 400.4 mortar pumps
Screw (gerotor) mortar pumps of the EUROMIX 400.4 series manufactured by the EUROMIX PLANT are designed for transportation under pressure of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.4 series gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600 series mixers or with turbulent type mixers of the NAVIGATOR series. The EUROMIX 400.4 series pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
The EUROMIX 400.4 series of mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30177
EUROMIX 400.1 MINI mortar pumps
EUROMIX 400.1 MINI screw (gerotor) mortar pumps manufactured by the EUROMIX PLANT are designed for pressure transportation of mixtures, building mortars, light concretes (foam concrete, polystyrene concrete), as well as liquid and pasty materials and suspensions with fibers or solid particles. These units are widely used as transportation mechanisms in the technological lines of the construction industry, as well as in the production of construction works. For example, EUROMIX 400.1 MINI gerotor mortar pumps are used in the production lines of MK StroyPoliBeton and MK StroyPenoBeton to supply the prepared concrete mixture from a BSL DELTA type mixing plant to forming equipment. Paired with EUROMIX 600, EUROMIX SUPERMIX series mixers or EUROMIX NAVIGATOR series turbulent type mixers, EUROMIX 400.1 MINI pumps can be used on construction sites for flooring and roof insulation, as well as for mixing and pouring the mixture into the formwork.
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
EUROMIX 400.1 MINI mortar pumps are rotorotatory (gerotor) mechanisms. They are based on a screw pair, one of the elements of which, a single–entry screw (rotor), rotates along a planetary trajectory inside a two–entry helical cage made of elastic material (stator). Moving relative to each other, the rotor and stator constantly create several cavities along their axis, which increase in volume from the suction zone and create a vacuum, and then "drive" a wave of sucked material towards injection. The operating characteristics of the solution pump depend on the speed of rotation of the rotor, the pitch and length of its screw, and the total volume of the stator cavities: the range of material supply, as well as the amount of mixture moved per unit of time. ...
#30179
Concrete pumps KRANMASH TP49RZ6-Sinotruk
Advantages
The boom is made of high-strength grade 700 structural steel. It is characterized by high strength and light weight. It is optimized using finite element analysis and dynamic analysis. The boom has a beautiful appearance and good bearing capacity.
The boom is a five-section arm of the RZ type, which is flexible for folding and unfolding.The maximum angle of the boom of 240° makes the fabric wider and meets various fabric requirements. ...
The boom is made of high-strength grade 700 structural steel. It is characterized by high strength and light weight. It is optimized using finite element analysis and dynamic analysis. The boom has a beautiful appearance and good bearing capacity.
The boom is a five-section arm of the RZ type, which is flexible for folding and unfolding.The maximum angle of the boom of 240° makes the fabric wider and meets various fabric requirements. ...
#30382
XCMG HB37V Concrete Pumps
The XCMG HB37V concrete pump is a specialized construction equipment that ensures the efficient supply of concrete mix from the concrete mixer truck to the installation site. It is a pumping unit mounted on a cargo chassis with a concrete distribution boom. The concrete pump is widely used on a wide variety of construction sites due to its convenience and efficiency. The maximum feed height of this model is 36.3m, with a capacity of 120/170 m3/h. The use of a concrete truck pump increases the speed and quality of construction work.
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
Maximum feed volume, m3/h (low/high pressure) 170/120 ...
#30289
XCMG HB37V concrete pump on ISUZU 6x4 chassis
NEW XCMG concrete pump on ISUZU GIGA 6x4 chassis, feed height 37 m.
It is located on the Chinese border. The delivery time is 20 days.
There are also concrete pumps of 30 and 43 m on the border! ...
It is located on the Chinese border. The delivery time is 20 days.
There are also concrete pumps of 30 and 43 m on the border! ...
#29844
You might also be interested in other listings:
Xcmg XMR603VT combined skating rinks,弗拉基米尔
Length (with bulldozer blade and ripper), mm: 10010;
Width (along the wheel studs), mm: 2500;
Height (with flashing light), mm: 3620; ...
Width (along the wheel studs), mm: 2500;
Height (with flashing light), mm: 3620; ...
#14202
Xcmg XMR603VT combined skating rinks,弗拉基米尔
Length, mm: 9790;
Width, mm: 2500;
Height (with flashing light), mm: 3620; ...
Width, mm: 2500;
Height (with flashing light), mm: 3620; ...
#14204
Xcmg XMR603VT combined skating rinks,弗拉基米尔
Overall dimensions:
Length (without ripper), mm 9960
Width, mm 2500 ...
Length (without ripper), mm 9960
Width, mm 2500 ...
#14205
Xcmg XMR603VT combined skating rinks,弗拉基米尔
Weight of the base machine, kg
20487 kg ...
20487 kg ...
#14206
Xcmg XMR603VT combined skating rinks,弗拉基米尔
Engine: D-180 (180 hp);
Engine start system: P-23U starter motor;
Manual transmission (4 forward and 4 reverse speeds); ...
Engine start system: P-23U starter motor;
Manual transmission (4 forward and 4 reverse speeds); ...
#14207
Rake Azas GVV-6M,克拉斯诺亚尔斯克
The official dealer of DONGFENG Center Vladimir offers to your attention the dump truck Dongfeng DFH 3330A80 6x4. Cummins ISLe340 50 engine, direct injection, Common Rail high-pressure fuel system, heating for starting. The reliable Fast Gear 12JS180T DD transmission, with 12 forward gears and 2 synchronized rear gears, has a large safety margin of 1800 Nm. Tires 315/80 R22.5. A double gearbox, tandem axle, with axle lock and wheel lock with a gear ratio of 5.92 ensures good cross-country performance. A complete pneumatic braking system, a split pneumatic circuit, a parking spring brake acting on the rear axles, an output brake and ABS will create confidence in operation for every day. The heated body will make the operation of the equipment more comfortable and cleaner. Sleeping cabin with a flat head, front type of control, the entire welded steel cabin is inclined, factory quality anti-corrosion coating, air conditioning is available.
CHASSIS DIMENSIONS (mm) ...
CHASSIS DIMENSIONS (mm) ...
#16472
Rake Azas GVV-6M,克拉斯诺亚尔斯克
The official dealer of DONGFENG Center Vladimir offers to your attention the dump truck Dongfeng DFH 3440A80 8x4. Cummins ISLe380 50 engine, direct injection, Common Rail high-pressure fuel system, heating for starting. The reliable Fast Gear 12JS180T DD transmission, with 12 forward gears and 2 synchronized rear gears, has a large safety margin of 1800 Nm. Tires 315/80 R22.5. A double gearbox, tandem axle, with axle lock and wheel lock with a gear ratio of 5.92 ensures good cross-country performance. A complete pneumatic braking system, a split pneumatic circuit, a parking spring brake acting on the rear axles, an output brake and ABS will create confidence in operation for every day. The heated body will make the operation of the equipment more comfortable and cleaner. Sleeping cabin with a flat head, front type of control, the entire welded steel cabin is inclined, factory quality anti-corrosion coating, air conditioning is available.
CHASSIS DIMENSIONS (mm) ...
CHASSIS DIMENSIONS (mm) ...
#16473
#16474
林德R16前移式叉车拆卸。 克拉斯诺亚尔斯克。
Specifications
Power hp 75(102)
Load capacity, t 1.5/3.1 ...
Power hp 75(102)
Load capacity, t 1.5/3.1 ...
#17105
遮阳篷或窗帘五十铃前进，莫斯科
The JAC K7 is a high–tech tractor truck designed for transporting various types of goods over long distances. The car can be used in a wide variety of industries, from construction and industry to agriculture and retail.
The 4x2 wheel formula and the distance between the axles of 3,900 mm ensure compact dimensions. With a curb weight of 7568 kg, the JAC K7 can operate as part of a road train with a gross weight of up to 45 tons. The car is powered by a powerful 6-cylinder engine with a volume of 11.8 liters, which develops 488 hp and 2,030 Nm of torque. ...
The 4x2 wheel formula and the distance between the axles of 3,900 mm ensure compact dimensions. With a curb weight of 7568 kg, the JAC K7 can operate as part of a road train with a gross weight of up to 45 tons. The car is powered by a powerful 6-cylinder engine with a volume of 11.8 liters, which develops 488 hp and 2,030 Nm of torque. ...
#18159
遮阳篷或窗帘五十铃前进，莫斯科
The JAC N90 is one of the most modern representatives of the line of medium–tonnage commercial trucks. The total weight of the car is 9,030 kg, it is very maneuverable and can carry goods over short, medium and long distances. The model has been specially adapted for Russian working conditions.
The JAC N90 is equipped with a modern cabin with an ergonomic interior, designed for three people. ...
The JAC N90 is equipped with a modern cabin with an ergonomic interior, designed for three people. ...
#18161
遮阳篷或窗帘五十铃前进，莫斯科
Dump truck on a JAC N120 truck from the GEF Automobile Plant (chaika-service).
The car is equipped with a dump truck body, "scoop" configuration, tilt angle up to 50 degrees, capacity up to 10 m3. ...
The car is equipped with a dump truck body, "scoop" configuration, tilt angle up to 50 degrees, capacity up to 10 m3. ...
#18162
Items per page:
Adding to Favorites
Your comment:
Email
Phone number
Connection will be made via internet - no charges apply. Microphone access required.
Request contacts access
Request contacts access